Can You Really Use a Laser Marking Machine? Here's the Complete Answer

Jun 09, 2025

Leave a message

Can You Really Use a Laser Marking Machine? 

  First, connect the power supply and turn on the emergency stop switch, then turn on the computer, galvanometer, and laser in sequence.

Install the printing software on your computer, start making the content you want to print, and click Apply after adjusting it.

  Place the object to be marked on the marking table, use a ruler to measure the height of 384mm, click F1 to preview, if it exceeds the border, you need to return to the computer to adjust the border height.

Main Interface

  The User's Manual will introduce each menu (File, Edit, Draw, Modify, View, Help) in turn.
"Open" is used to load a saved ".ezd" file, and its shortcut key is "Ctrl + O". When click "Open", the software will pop an open-file dialog to ask you select the file you want to open, When you select a valid ".ezd" file, the dialog would display the preview of the file (you must have saved the preview when you save the file)

  After adjustment, you can click F2 to print.

  After finishing the work, turn off the computer first, then the laser, the galvanometer, and finally the emergency stop switch. Note the interval between each step for a few seconds.

Send Inquiry