What should I do if an error occurs when using the cleaning machine?
May 27, 2025
Leave a message
What should I do if an error occurs when using the cleaning machine?
1. First check the lens to see if there are any black spots or damage
2. Check if the focusing lens is damaged
3. Check if the collimator is worn out
4. Finally check if the motor is damaged

Disassembly and assembly of protective glass
※ The disassembly and assembly shall be completed in a clean
place. When the lens are dismounted, the dust-free gloves or
dust-free fingerstall. Change the protective lens
The first step is to take both sides of the drawer in hand and pull
out the protective drawer seat upward. After taking it out, seal
the window exposed on the cavity with textured paper to prevent
dust from entering.
Focus drawer
Step II, when the two bosses are aligned with the opening slot
after the gland is rotated anticlockwise, remove them upward
and replace the lens.
