Pipe Laser Cutting Machine

What is pipe laser cutting machine?

A pipe cutting machine is a piece of industrial equipment engineered for the precise sectioning of pipes and tubes, primarily metallic ones such as steel, stainless steel, aluminum, and copper. Unlike standard cut-off saws, these machines are specifically configured to handle the hollow geometry of tubular profiles without causing deformations like burrs or collapses.

What are the characteristics?

High Precision: Delivers clean, smooth cuts with minimal burrs, essential for high-quality welding and assembly.

High Efficiency: Automated operations significantly increase productivity compared to manual cutting methods.

Versatility: Capable of processing a wide range of materials, diameters, and wall thicknesses.

Complex Cutting Capabilities: Can perform not only 90-degree cuts but also angle cuts, miters, and even intricate profile cuts (also known as fishmouth or intersecting cuts) where one tube needs to fit perfectly against another.

Cutting shape

"The pipe is cut straight across, perpendicular to its axis."

"A 90-degree cut on the pipe."

"Square cut of the pipe."

"The pipe is cut at a 45-degree miter angle."

"An angled cut on the pipe."

"The end of the pipe is mitered."

"The pipe requires a compound miter cut."

"It's a combination of a miter angle and a bevel angle."

"The pipe end is beveled for welding."

"A bevel cut is made on the pipe to prepare a V-groove weld joint."

"A saddle cut was made on the pipe to fit over the main run pipe."

"This is a lateral connection with an offset saddle."

The limit switches at both ends of the stroke are controlled,and a hard limit device is installed.

Front Feeding device

The front feeding device includes a support plate controlled by an air cylinder, which supports thepipe when the cut pipe is long and prevents it from sagging. When the work piece is being cut, the raised support cylinder supports the support plate to support the pipe and prevents it from sagging.When the work piece is cut, the raised support cylinders are all retracted, and the work piece falls tothe blanking plate and slides to the storage place. Cylinder action is automatically controlled bythe system. The front section is also divided into follow-up type and manual adjustment type.

Rotary device pneumatic

ATC chunk The chuck is divided into front and rear two pneumatic full-stroke chucks, both of which can move in the Y direction. The rear chuck is responsible for clamping and feeding the pipe, and the front chuck is installed at the end ofthe bed for clamping materials. The front and rear chucks are respectively driven by servo motors to achieve synchronous rotation. Under the joint clamping of double chucks, short tail cutting can be realized, and the short tail of the mouth can reach 20-40mm, while supporting the short tail cutting of longer tail.

iTubeSE Specifically designed for controlling and operating laser cutting equipment equipped with an iTube CNC system, enabling efficient and precise cutting of various pipe materials. Users can use this software to configure and operate the motion controller (such as the iMC6610 motion controller) and height controller (such as the iHC100B height controller) of the laser cutting machine in detail.

Schneider electric element Electrical components are famous brands, which is popular in market. Stable work ability.

Fixture After the material falls, clamp the material.

 

Hot Tags: pipe laser cutting machine, China pipe laser cutting machine manufacturers, suppliers, metal laser cutting systems, fiber laser machine, fiber laser pipe cutter machine, best fiber laser machine, cnc laser metal cutting machine price, Metal Tube Fiber Laser Cutting Machine