How to adjust the speed of CNC plasma cutting machine
Nov 05, 2024
Leave a message
The speed adjustment of CNC plasma cutting machine mainly involves the following aspects:
Initial speed setting: Before CNC plasma cutting, the initial speed needs to be set first. The initial speed refers to the speed at which the cutting head starts to move from the surface of the material to be cut. Normally, the initial speed should be set to 1/3 to 1/2 of the thickness of the material.
Adjust according to material type and thickness: Different types and thicknesses of materials require different cutting speeds. For example, for thinner metal sheets, the cutting speed should be appropriately increased, while for thicker materials, the cutting speed needs to be appropriately reduced. In actual operation, it can be adjusted according to experience and test results.
Adjust the plasma arc power: The level of plasma arc power will also affect the cutting speed. The higher the power, the faster the cutting speed. Therefore, while adjusting the cutting speed, the plasma arc power also needs to be appropriately adjusted.
Adjust according to cutting quality: During the cutting process, the cutting quality needs to be constantly observed. If the cutting quality is not good, the cutting speed and power can be adjusted appropriately. For example, if cutting burrs appear, it means that the cutting speed is too fast, and the cutting speed can be appropriately reduced.
