Process flow of CNC woodworking lathe

The process flow of CNC woodworking lathe mainly includes the following steps:

Preparation work:

Prepare the required workpiece according to the product drawings and process requirements.

Design a reasonable processing plan and write a CNC programming program.

Select a suitable tool and install it on the lathe.

Adjust various parameters of the machine tool, such as speed, feed, cutting depth, etc., to ensure the stability of the processing process.

Programming and debugging:

Input the written program into the CNC system, simulate the processing path, and check whether the program is correct.

Program rough turning, semi-finishing turning and full-precision processing programs according to product requirements to meet the processing requirements of the drawings.

Convert the programming into a code that can be recognized by the CNC machine tool, perform simulation, and check whether the programming and tool will make mistakes.

Processing operation:

Start the machine tool and operate according to the program instructions. Pay attention to the changes in the processing process and keep the machine tool running stably.

During the processing process, keep the machine tool clean and clean the chips and coolant in time.
According to the actual situation, reasonably adjust the feed speed and cutting depth of the tool.
‌Quality inspection and finishing‌:

After processing, the quality of the processed workpiece is inspected to check whether the dimensional accuracy and surface quality meet the requirements.
The processed workpiece is trimmed and cleaned to ensure the neatness and smoothness of the workpiece.